▷ 7 sec video
Forces & motion
Paper helicopter exhibit
Place a prepared paper piece inside a transparent wind tube and observe its movement during the guided airflow activity.
Enhanced photograph · Real operating video
Forces & motion
Elastic airplane launcher exhibit
Load a model airplane onto an elastic launch ramp and observe its flight toward the separate ring target.
THE PRODUCT IN MOTION
See it work.
The operator places a small model airplane on a wooden launch board and draws the elastic, with the ring-target cabinet behind the station.
Video & text guideTHE ACTIVITY & MECHANISM
Launch a model airplane toward a ring
Drawing back the elastic stores energy in the launcher. On release, part of that stored energy becomes motion of the small model airplane along the launch guide and into flight. The separate ring target provides a visible reference for comparing the resulting path.
- 01
Place the airplane
Set the agreed model airplane on a launch ramp and its guide.
- 02
Prepare the launch
Follow the operating instructions for aiming and drawing the elastic.
- 03
Release and observe
Release toward the target, then retrieve the airplane before repeating the activity.
REFERENCE & PROJECT SCOPE
Reference specifications.
Use the reference dimensions and operating information to plan the exhibit. The agreed project drawings define the supplied configuration, installation interfaces and service access.
- L × W × H
- 980 × 780 × 1,250 mm
- Exhibit theme
- Forces & motion
- Visitor activity
- Load the airplane. Aim for the rings.
- Power & supply
- Confirm whether this configuration requires power. Powered versions can be specified for 110/220 V AC and 50/60 Hz.
- Configuration options
- Appearance, interpretation language, controls and installation arrangement by project agreement
- Daily operating schedule
- 8 hours per day
- Scheduled maintenance
- Every 30 days
- Factory dispatch lead time
- 30–90 calendar days after design approval and receipt of the deposit. Transit time is additional.
- Minimum custom order
- One exhibit
Reference product dimensions in length × width × height order, including its base or cabinet where present. Allow additional installation and service clearances in the project layout.
Reference configuration notes
- Shown arrangement
- Two launch ramps on one cabinet and three target rings on another
- Visitor action
- Place a model airplane, draw the elastic and release
- Planning priority
- The launch direction, separation between cabinets and retrieval route
Customisation, installation & support
- 01Launch area
- Share the available footprint and agree the cabinet spacing, launch direction and visitor position around the target.
- 02Airplanes & elastic
- Confirm the airplane design, loading sequence, replacement parts and how staff inspect the elastic and anchors.
- 03Aim & supervision
- Agree the adjustment range, instructions, intended student group and a supervised retrieval routine.
BEFORE AN ENQUIRY
Questions & support.
24 months of complimentary spare-parts support, remote technical guidance and long-term after-sales support. Exhibit Engineers pays the shipping cost of complimentary spare parts during the 24-month support period.
Explore the supportDelivery, installation & after-sales terms
- Payment
- A 50% deposit is payable after the contract is signed. The remaining balance is paid after acceptance and before dispatch, so full payment is received before dispatch. Payment methods are agreed in the contract.
- Packaging & transport
- Metal shipping cases or multilayer wood-panel shipping cases. Transport arrangements and costs are agreed to suit the project.
- Materials & painted finish
- Common material options include Q235 steel, stainless steel, aluminium alloy, PVC, acrylic, engineering plastics. The combination is selected for each configuration. Marine anti-corrosion paint with a piano-gloss automotive paint finish. Applied to painted parts.
- Typical power · powered versions
- Standard products: 100–500 W; oversized installations: 1,000–5,000 W. Typical ranges for powered versions. Confirm the selected model and final connected load.
- Product maintenance
- Agree cleaning, control checks and inspection of accessible parts for the supplied configuration.
- Installation & training
- Complimentary training is available on site or remotely, according to project needs. If installation or on-site after-sales service is not included in the product price, the customer pays the actual travel expenses incurred, unless the contract provides otherwise.
- Factory acceptance & handover
- Mid-production and pre-dispatch checks are provided. Factory acceptance can take place in person at the factory or through acceptance videos. Installation and operating videos, written installation and operating instructions, drawings and a spare-parts list are provided.
- Complimentary parts
- 24 months of complimentary spare-parts support, starting when the exhibit is handed over for use. Covers faults not caused by the user. User-caused or deliberate damage is excluded. Exhibit Engineers pays the shipping cost of complimentary spare parts during the 24-month support period.
- Warranty & repair labour
- The whole-exhibit warranty period and repair labour scope and charges are agreed in the contract.
Can we discuss a prototype or sample for a custom version?
Yes. Prototype testing and sample fabrication are available for custom projects. Discuss which functions or features you need to review for your version. The scope, cost and schedule are agreed for the project.
How prototype testing & samples workDoes the airplane fly around a circular track?
The photographed exhibit uses elastic launch ramps aimed at ring targets. It is an airplane-launching activity, rather than an aircraft attached to a circular track.
Can the two cabinets be positioned for our room?
The arrangement can be discussed against the available space. The final distance and launch setup need to be checked with the selected airplanes and operating sequence.
What do the images and videos show?
The gallery labels photographs, video frames, renderings and the dimension drawing. Physical footage is identified separately.
CONTINUE EXPLORING
Related products.
▷ 18 sec video
Forces & motion
Wing lift demonstrator
Operate the front control and observe a curved wing inside a transparent airflow enclosure, with its supporting linkages visible.
Enhanced photograph · Real operating video
▷ 18 sec video
Forces & motion
Flight simulator exhibit
Use a physical control yoke and levers to explore how control inputs change the aircraft view on an integrated screen.
Enhanced photograph · Real operating video
▷ 3.4 sec video
Forces & motion
Rocket launch exhibit
Press the operating block and follow a small rocket as it moves along its vertical guide during the demonstration.
Enhanced photograph · Real operating video
FROM CONCEPT TO TURNKEY DELIVERY
Start with a reference. Shape your version.
Share the exhibit name, intended users and a plan or description of your setting. We can work through the experience and practical scope.